Turbo Metal Reviews

This is a general installation guide to Fog Lights.  The fog lights at Turbo Metal come as a complete set with switch, mounting brackets, and everything wired ready to go.

Installation Steps

1. Remove the fog lights from the box and locate the switch and wiring.

2. Use brackets to mount the fog lights in the desired location.

3. Locate a convenient place in the vehicle to mount the switch for the fog lights. Mount switch.

4. Locate a source of power under the hood that does not directly attach the wires to the battery.

5.  Connect as follows: source to switch, switch to fog lights, fog lights to source.

6. Install bulbs.

7. Test the fog lights.  If the selected source fuse blows, replace and try connecting to another source.

8. Proceed if it all works. If not, check connections.

9. Cover all joints with electrical tape to ensure water tightness.

Item List Needed For Installation

1. Electrical tape

2. Light bulbs

3. Wire strippers

4. Wire nuts

5. Mounting brackets

6. Switch

7. Fuses

8. Relay

9. Fog lights

2004-2005 Honda Civic Coupe or Sedan Clear Fog Lights

2004-2005 Honda Civic Coupe or Sedan Yellow Fog Lights

2002-2004 Honda CR-V Clear Fog Lights

1996-2002 Honda Prelude Yellow Fog Lights

2004-2007 Scion TC Amber Fog Lights

2005-2007 Toyota Corolla Yellow Fog Lights

Warning Disclaimer: The following instructions are given for informative purposes only. Try at your own risk. Turbo Metal is not responsible for damages because of this process.