Use the alcohol pad to clean the area shown in the pictures before installation. This will help the m3 tape stick on to the vehicle.
Use the tube shown in the picture as a primer before installing the sliding window curtains. Let the alcohol dry from the area you cleaned and then apply content of the tube to the cleaned area. We recommend using a q-tip or a small towel.
Start removing the end caps on the rails then remove the stoppers.
Remove the red paper shielding the m3 tape then bring the rail to vehicle and place it at the desired area in which you want the curtain to be on the vehicle. Make sure you place it carefully in the area of desire because if you mess up, taking it off to be replace is very difficult. When the rail is placed in the perfect area, press down firm to secure the rail to the vehicle’s door panel.
You will now need to put the hooks through the rail. Start with the bottom and the top.
Now all you need to do to finish everything off is put in the locking caps then the ends caps on the rails and you’re done. Don’t forget to add the sliding window curtain holder to the window frame.