Turbo Metal Reviews

Turbometal would like to share with everyone about the DIY installation guide for Acura RSX Rear Upper Strut Bar 02-04.  If you are interested in getting the Acura RSX Rear Upper Strut Bar 02-04, you can find more information in Turbometal’s storefront.

Acura RSX Rear Upper Strut Bar 02-04 (Free Ship to 48 Domestic States)

You may also interested in the rear lower tie bar:

Acura RSX Rear Lower Tie Bar 02-06 Carbon Fiber Painted (Free Ship to 48 Domestic States)

Step 1. The Tools You will need to prepare:

· Ratchet

· 12mm and 14mm socket

· Exacto Knife

Step 2: Remove the carpet and Styrofoam from trunk.

Step Three: Unbolt the two 14mm strut bolts and the one 12mm bolt that holds down the silver metal plate (shown here in blue) on both the left and the right side.

Step Four: Attach the strut bar supports on both sides. Do not tighten down the bolts just lightly screw them on. Attach one side of the strut bar to the support to use a template. Now, cut out holes in the side carpet pieces where the strut bar will come through. Keep cutting until the bar can easily fit and mount properly on both sides through the carpet.

Step Five: Attach both sides of the strut bar to the supports using the 6mm allen wrench and supplied hardware. Now tighten down the two 14mm strut bolts on both the left and the right side (make sure they are tight).

Step Six: Reinstall the carpet into the trunk and polish the bar. The Installation is now completed!

Warning Disclaimer: The following instructions are given for informative purposes only. Try at your own risk. Turbo Metal is not responsible for damages because of this process.