Classic 7’’ round headlights has never looked so good until now. Turbometal unveiled its 7’’ round sealed beam headlights with a twist of adding LEDs into the headlight. These 7” round led headlights can be used with any vehicle with a 7 inch headlight application. The headlights are compatible with hid kits as well.
Installation is very simple on these 7” round led headlights. All you need to do is remove the rubber cap on the back of the 7” led round headlights, place the bulbs in or hid bulbs in and lock it into place with the metal pins. If you plan on using these 7” round led headlights with a hid kit, make sure when you’re putting the bulbs in they are not touching the side. Take your time and install them the correct way or else if the bulbs touch the side of the housing, the high temperature hid bulbs will heat up the housing and cause smoke. In the back of the 7” round led headlights there are also 2 sets of loose wires for the Led, which can be wiring into the parking lights or the headlights to be turned on. It’s just a matter of personal preference.