Turbo Metal Reviews

If you want to get the 2005-2008 Dodge Magnum LED Tail Lights but you wonder how to install these led tail lights, here’s the DIY installation menu for the 2005-2008 Dodge Magnum LED Tail Lights.  If you want to get these tail lights now, you can check them out at Turbometal.com.

Step 1: Remove 2 clips as shown in the picture

Step 2: Behind the tail lights, there is a plastic cover, please remove it

Step 3: There is a plastic screw underneath, please take it out

Step 4: Then remove the tail lights and take off the harness

Step 5: Take out each harness by turn them counter-clockwise

Step 6: Plug the harness into the LED Tail Light socket

Step 7: Place the relay on the inside and plug in the socket in the original location

Step 8: Place back the two clips

Step 9: Place back the plastic screws to the original

Step 10: Put back the plastic cover

Step 11: Check all the lights and now the installation is completed